238 APPENDIX
7. Copy the CHDK files DISKBOOT.BIN and PS.FI2 onto this partition, too,
so that later we can also boot from this partition. By now, we should
have the CHDK on both partitions.
8. Load the CHDK again using the function Firm update…
9. Now perform
ALT > MENU > Miscellaneous Stuff > Swap partitions again
to make the first, small partition visible.
10. Invoke the function
ALT > MENU > Main Menu > Miscellaneous stuff >
Make card bootable to enable the AUTORUN function. This will make
the first partition bootable.
11. Write-protect the card and switch the camera on again. It should now
perform an AUTOSTART from the first, small partition. When the CHDK
detects a second partition formatted with FAT32, it will switch all ac-
cess functions to the second partition. Until the next start, the first,
small partition will not be used again.
There is one more problem when you want to exchange files with a com-
puter running under Windows. Windows can only see the first partition. To
make your files accessible to Windows, you must first swap the partitions
via
ALT > MENU > Miscellaneous Stuff > Swap partitions. Afterwards, you
must swap partitions again—to do so, you may need to boot from the
FAT32 partition using the function Firm update….
To Next Page
Loading...
