Checking the Package Contents
1 Scanner
2 USB Interface Cable
3 Stand
4 Setup CD-ROM
5 Quick Start Guide
Installing the Software
• Do NOT connect the scanner to a computer before installing the software. If you connect the scanner and the
Found New Hardware Wizard appears, unplug the USB cable from the computer, and then click [Cancel].
• Quit all running applications before installation, including anti-virus software.
• To upgrade from Windows
®
XP to Windows Vista
™
operating system, first uninstall software bundled with the
Canon scanner.
• Log in as an administrator to install the software.
1 Place the Setup CD-ROM in the drive.
For Macintosh
®
: Double-click the [Setup] icon. Enter the administrator ID and password on the
authentication dialog box.
2 For Windows Vista, when the [AutoPlay] dialog box (*1) appears, run the setup program, and
then click [Continue] to proceed when the [User Account Control] dialog box (*2) appears.
For Windows 2000/XP and Macintosh, skip this step and go to step 3.
3 Click [Easy Install] on the main menu (*3).
4 Click [Install] to start installation.
Carefully read the License Agreement, and then click [Yes] to proceed.
5 Follow the on-screen instructions to perform the installation.
When the Registration dialog box appears, follow the on-screen instructions to ensure product support.
6 When the installation is complete, click [Restart] to restart your computer.
After restarting the computer, "Solution Menu" will appear. Refer to the last part of the "Try Scanning"
description.
Preparing the Scanner
1 Slide the lock switch on the bottom of the scanner toward the unlock mark ( ).
• Always lock the scanner when carrying or transporting it.
2 Connect the scanner to the computer with the supplied USB cable.
• Only use the USB cable provided with the scanner. Use of other cables may lead to a malfunction.
• The scanner does not have a power switch. The power is activated as soon as the computer is turned on.
• When the scanner is connected to the USB 1.1 port and "HI-SPEED USB Device Plugged into non-HI-
SPEED USB Hub" message appears, ignore the message. The scanner operates in this condition without
problems.
Try Scanning
1 Place a document on the document glass and close the document cover.
2 Start ArcSoft PhotoStudio.
For Windows: Select [Start]-[(All) Programs]-[ArcSoft PhotoStudio 5.5], then click [PhotoStudio 5.5].
For Macintosh: Open [Applications]-[PhotoStudio] folders, then double-click the [PhotoStudio] icon.
3 Click [File] menu, [Select Source] and select the scanner model.
For Windows: Do not select the one that includes [WIA] in the model name.
4 Click the acquire icon to start ScanGear.
5 Select the type of document you are scanning in [Select Source] and click [Preview].
6 Click [Scan] to start scanning.
• Do not move the scanner while it is operating.
7 When prompted to close ScanGear, click [OK].
8 Save the scanned image in ArcSoft PhotoStudio and close the window.
<Solution Menu>
You can select MP Navigator EX, the Scanning Guide (on-screen manual), or the Online Registration.
Using the Scanner Buttons
See the back page for the instructions for "Scanning in the upright position".
Quick Start Guide
*1
*2
*3
Bottom
Top
COPY Button
Prints (copies) the scanned image with a printer.
PDF Button
Saves the scanned image as a PDF file.
PHOTO Button
Opens the scanned image in the bundled
application program, ArcSoft PhotoStudio.
E-MAIL Button
Attaches the scanned image to a new e-mail
message.
• For Mac OS X v.10.3.x/10.2.8 or later: Refer to Other Scanning Methods in the Scanning Guide (on-screen
manual) before using.
QT5-1318-V01 XXXXXXXX ©CANON INC. 2007 PRINTED IN VIETNAM
To Next Page
Need help?
General
