Perform actions on a submitted job
Introduction
On the operator panel you can control your job.
Procedure
1.
Submit a job to the printer.
2.
On the operator panel, you see the job appearing in the queue, at the top of the screen. The job
on top is the active job.
Action
Pause Tap the [Pause] icon. The
printer pauses the job
when the image has been
printed.
Cancel Tap the job in the header.
The [Cancel] icon appears.
Tap [Cancel] to cancel the
job.
Re-
sume
When the printer is paus-
ing, the [Resume] icon ap-
pears. Tap [Resume] to
continue printing.
Stop When the printer is paus-
ing, the [Stop] icon ap-
pears. Tap [Stop] to stop
printing. The image that
has been printed is cured.
The queue is stopped.
Move
up
Tap to select a job from the
queue. Tap on the [Move
up] icon to move the job
up in the queue.
Perform actions on a submitted job
168 Chapter 5 - Print a job
To Next Page
Loading...
General
