Chapter 3
3-71
feeder cover [3].
F-3-266
3.4.12.4 Replacing the
Separation guide
Sheet
0007-1692
1) Open the separation guide.
2) Remove the 2 screws [1], and detach the
guide fixing [2].
You will need a stubby screwdriver to
remove it.
3) Peel off the separation guide sheet [3];
then, clean the area left behind by the
sheet and the area around it with lint-
free paper moistened with alcohol.
4) Attach the new separation guide sheet
[4] as shown.
When attaching the sheet, be sure to
butt it against the stop in both horizontal
and vertical directions.
F-3-267
[3]
[2]
[1]
[3]
[2]
[1]
[4]
To Next Page