Canon ImageCLASS MF4570dw - Registering and Editing Coded Dial Codes; Registering and Editing Via the Operation Panel

5-6
Registering Destinations in the Address Book
This section describes the following procedure.
• Registering coded dial codes
• Editing coded dial codes
• Deleting coded dial codes
Registering and Editing via the
Operation Panel
Keys to be used for this operation
OK
FAX
Address Book
Back
Tone, Numeric keys
1 Press [ ].
2 Press [ ] (Address Book).
● Registering a coded dial code newly
(1) If there are destinations registered, press [
].
If you are registering a destination for the first time,
proceed to step (2).
(2) Press [ ] or [ ] to select <Register New Destination to
Address Book>, and then press [OK].
Register New Destina
Edit Address Book
Address Book Details
All A-Z
When the address book PIN is specified
Use the numeric keys to enter the PIN, and then press
[OK].
Address Book PIN
(Apply: Press OK)
*******
(3) Press [ ] or [ ] to select <Coded Dial>, and then press
[OK].
Register Location
Coded Dial
One-Touch
(4) Press [
] or [ ] to select <Fax>, and then press [OK].
Destination Type
Fax
Group
(5) Press [ ] or [ ] to select <Name>, and then press [OK].
Fax
<Apply>
Name:
Destination:
Coded Dial: 001
(6) Use the numeric keys to specify <Name>.
“Text Input Method” (→P.1-9)
Name (Max 16 char.)
CANON
<Apply>
Entry Mode: A
(7) Press [ ] or [ ] to select <Apply>, and then press [OK].
Name (Max 16 char.)
CANON
<Apply>
Entry Mode: A
(8) Press [ ] or [ ] to select <Destination>, and then press
[OK].
Fax
<Apply>
Name: CANON
Destination:
Coded Dial: 001
(9) Use the numeric keys to specify <Destination>.
Press [OK] to specify <Settings> as needed.
Destination (Max 40)
0123456789
<Apply>
Settings
(10) Press [ ] or [ ] to select <Apply>, and then press [OK].
Destination (Max 40)
0123456789
<Apply>
Settings
Registering and Editing Coded Dial Codes