1
2
3
4
5
6
7
8
9
10
11
Back
Next
Previous
TOP
6-12
Before Using the
Machine
Document and Paper
Copying
Sending and
Receiving
Printing and
Scanning
Network
Remote UI
System Manager
Settings
Maintenance
Troubleshooting
Appendix
Index
Table of Contents
5. Press [ ] or [ ] to select <LPD PRINT>, then
press [OK].
6. Press [ ] or [ ] to select <ON> or <OFF>,
then press [OK].
<ON>: Uses LPD as the print application.
<OFF>: Does not use LPD.
7. Press [ ] or [ ] to select <RAW PRINT>, then
press [OK].
8. Press [ ] or [ ] to select <ON> or <OFF>,
then press [OK].
<ON>: Uses Raw as the print application.
<OFF>: Does not use Raw.
9. Confirm that <USE BIDIRECTIONAL> is
displayed, then press [OK].
10. Press [ ] or [ ] to select <ON>, then press
[OK].
<ON>: Establishes bidirectional communication using Port 9100.
<OFF>: Does not establish bidirectional communication using Port
9100.
11. Press [Stop/Reset] to return to the standby
mode, then restart the machine.
Machine Connection Method (LPD/Raw)
Connecting to a TCP/IP Network:
All computers that use the machine must have TCP/IP client
software installed and must be enabled for TCP/IP network use. For
details, see the manuals provided with the operating system.
Installing the Printer Driver and Specifying the Machine
Destination Setting:
To print from a computer, you must install a printer driver and
specify a setting for the machine destination. The machine
destination setting differs depending on the print application used
for printing. Use the following information as a guide to determine
the print application you are using, and then perform the necessary
operations.
LPD: This is the print application generally used with TCP/IP.
Raw: This is a print application used with Windows 2000/XP/
Server 2003/Vista. It can print at higher speeds than LPD.
In the following procedures, items displayed on the screen for Windows XP
are used; items might differ depending on your operating system.
■
●
●
–
–
To Next Page
Loading...
