Canon imageCLASS MF632Cdw - Generating a Key and Certificate Signing Request (CSR)

Generating a Key and Certicate Signing Request (CSR)
1647-089
Because certicates generated on the machine do not have a CA signature, a communication error may result
depending on devices it communicates with. To have the certicate authority issue the certicate with the CA
signature, you need to obtain data of CSR (Certicate Signing Request), which the administrator can generate from
Remote UI. When the certicate is issued, register it in the key with the CSR generated.
Generating a Key and CSR(P. 386)
Registering a Certicate to a Key(P. 388)
● For more information about the basic operations to be performed when setting the machine from the
Remote UI, see Setting Up Menu Options from Remote UI(P. 427) .
Generating a Key and CSR
1
Start the Remote UI and log in to System Manager Mode. Starting Remote
UI(P. 419)
2
Click [Device Management] on the Portal page. Remote UI Screen(P. 420)
3
Select [Device Management] [Key and Certicate Settings].
4
Click [Generate Key].
Deleting a registered key and certicate
● Click [Delete] on the right of the key and certicate you want to delete
click [OK].
● A key and certicate cannot be deleted if it is currently used for some purpose, such as when "[TLS]" or
"[IEEE 802.1X]" is displayed under [Key Usage]. In this case, disable the function or replace the key and
certicate before deleting it.
5
Select [Key and Certicate Signing Request (CSR)] and click [OK].
6
Specify settings for the key and CSR.
Managing the Machine
386