What to do if white lines or streaks appear in scanned images from Canon Printer?
If you're seeing white lines or streaks in your scanned images, try cleaning the scanning glass (both sides) and the feed and retard rollers. If there's any sticky substance like glue or correction fluid, carefully wipe it away from the area where the lines appear. If cleaning doesn't solve the problem, the internal glass may be scratched.
How to prevent text or images bleed through on Canon imageFORMULA DR-G2110 scanner?
To prevent text or images from bleeding through from the back side of documents, try increasing the [Brightness] setting on the scanner driver's [Brightness] tab sheet. You can also enable the 'Prevent Bleed Through/Remove Background' setting. If the paper is very thin, consider photocopying the original and scanning the copy.
How to enable duplex scanning on Canon Scanner?
To enable duplex (two-sided) scanning on your Canon Scanner, set [Scanning Side] to [Duplex] on the scanner driver's [Basic] tab sheet. Note that if Scanning Side is set to [Skip blank page], images of blank pages are not saved.
What to do if Canon imageFORMULA DR-G2110 documents are not scanned according to settings?
If documents are not scanned according to the configured settings, edit settings in the [Select document] panel, or create a new [Select document] panel using the desired scanning conditions.
How do I remove a black margin around Canon Printer scanned images?
To remove a black margin around scanned document images, on the [Basic] tab sheet, set the [Page Size] to [Match original size]. You can also adjust the margin setting in the minus direction or enable [Border Removal].
How to fix Canon Printer pages that are missing in scan?
To address missing pages during scanning, decrease the likelihood of skipping blank page value. Also, try setting the [Scanning Side] to another mode, such as simplex or duplex.
Why is my Canon imageFORMULA DR-G2110 scanner not turning on?
If your Canon Printer scanner isn't turning on, make sure the power cord is properly connected and plugged into a working power outlet.
How to fix paper jam in Canon imageFORMULA DR-G2110 Printer scanner?
To resolve paper jams in your Canon Printer scanner, first check that the roller is correctly installed. If jams persist, try selecting [Extra-thin paper] for the [Document type]. If the jam occurs after roller replacement or cleaning due to document curling, perform 5 single scans of an A4-sized document.
Why is my Canon imageFORMULA DR-G2110 scanner not recognized?
There are several reasons why your Canon Printer scanner might not be recognized. First, ensure the scanner is properly connected to the computer using the supplied USB cable and that the scanner is turned on. The computer’s USB interface may not support the scanner. If connected via a USB hub, try connecting directly to the computer. For LAN connections, check the cable connection, IP address configuration (using a static IP if a DHCP server is absent), and firewall settings (opening the mDNS port). Also, verify that the IP address and device name are not already in use. Try disconnecting and reconnecting the appropriate cables, and consider using the Canon imageFORMULA Driver Setting Tool to manually set the IP.
Why is my Canon Scanner ignoring driver settings?
If documents are not scanned according to the settings configured in the scanner driver for your Canon Scanner, edit settings in the [Select document] panel, or create a new [Select document] panel using the desired scanning conditions.
General| Type | Document Scanner |
|---|---|
| Resolution | 600 dpi |
| Interface | USB 3.0, USB 2.0 |
| Output Formats | JPEG, TIFF, PDF |
| Operating Temperature | 10°C to 35°C |
| Operating Humidity | 20 - 80 % RH |
To Next Page
