44
Item Specifications
Capacity Per Tray*
1
No Collating/Collate/Group mode with different paper sizes
Tray A:
1,000 sheets (or 5 3/4" (147 mm) in height)
Tray B*
2
:
If the High Volume Stack Mode is set to 'Off':
LTR and EXEC:
2,000 sheets (or 11 1/4" (285 mm) in height)
13" x 19", 12 5/8" x 17 11/16", 12" x 18", 11" x 17", LGL, and LTRR:
1,000 sheets (or 5 3/4" (147 mm) in height)
If the High Volume Stack Mode is set to 'On':
(The maximum stack volume may vary, depending on the paper type.)
LTR and EXEC:
4,000 sheets (or 19 1/4" (490 mm) in height)
LTRR:
2,000 sheets (or 11 1/4" (285 mm) in height)
11" x 17" and LGL:
1,500 sheets (or 8 1/2" (216 mm) in height)
13" x 19", 12 5/8" x 17 11/16", and 12" x 18":
1,000 sheets (or 5 3/4" (147 mm) in height)
Z-Fold mode (when the Paper Folding Unit-J1 is attached)
Tray A, Tray B: 30 sheets or 10 sheets/1 set
Half Fold (when the Paper Folding Unit-J1 is attached)
Tray A, Tray B: 50 sheets
*
1
To stack 2,000 sheets or more LTR paper, use Tray B first, and then use Tray A for outputting paper.
*
2
If the capacity values of the different paper sizes are different, the smallest value is applied to the Tray B capacity.
Max. Stapling Capacity/Available Staple Size When the standard staple cartridge is attached
(The maximum stapling capacity may vary, depending on the paper type and weight.)
LTR and EXEC:
100 sheets (20 lb bond (80 g/m
2
)) or below 1/2" (11 mm) in height, 98 sheets (20 lb bond
(80 g/m
2
)) + 2 sheets (140 lb index (256 g/m
2
))
11" x 17", LGL, and LTRR:
50 sheets (20 lb bond (80 g/m
2
)) or below 1/4" (5.5 mm) in height, 48 sheets (20 lb bond
(80 g/m
2
)) + 2 sheets (140 lb index (256 g/m
2
))
Corner Stapling:
11" x 17", LGL, LTR, LTRR, EXEC, and Custom Size (8 1/4" x 7 1/8" to 11 3/4" x 17" (210 mm x
182 mm to 297 mm x 432 mm))
Double Stapling:
11" x 17", LGL, LTR, LTRR, EXEC, and Custom Size (7 1/8" x 7 1/8" to 11 3/4" x 17" (182 mm x
182 mm to 297 mm x 432 mm))
To Next Page