Canon imagePRESS C10000VPSeries

Default Chapter1

Image Faults6

Faint White Line on a Second Side Image Due to the Stain on the Connection Lower Guide Roller for the Primary Fixing Assembly6
Uneven Gloss (Rain Drop Mark) in the High-Density Area in Usage of OHT7
Horizontal White Streaks with 2Mm Intervals on a High Density Green Image10
Uneven Gloss on the Entire High Density Image13
Glossy Streaks on High Density Portion16
10Mm Wide Glossy Lines Near 40/80/10Mm from the Center of the First Side of Duplex Printing17
MM-Wide Glossy Lines at Intervals of 5 MM in the High-Density Area on the First Side of Duplex Printing19
Prevention Method for Random Horizontal Lines on a Halftone Image Due to Curled ITB from Being Unused for a Long Time22
Ring Marks on an Image Due to the Foreign Substance Contamination in the Developing Assembly26
Error in Reading Image Position Adjustment Caused by Paper Fault27
Marks Appear on the Front Side of the Back Face of One-Sided Print or of the First Face of Two-Sided Print29
Strike Mark on the Fixing Roller Due to Toner Soiling30
Streaks on Image Due to an Erroneous Assemblage of the Pressure Refresh Roller31
Vertical Lines Due to Cross Feed Roller Pressure32
Non-Glossy Lines with a Width of 7 MM Due to the Life of Fixing Belt33
White Horizontal Lines at Intervals of 2Mm on Green High-Density Image Caused by Uneven Charge Amount of the ITB34
Uneven Density in a Grid Pattern on a High Density Image Due to the Uneven Resistance on ITB36
Soiling of Spots at ITB Intervals38
Soiled Image on the 1St Side of 2-Sided Print39
Soiled Trailing Edge/Soiled Paper Edge on both Sides of 2-Sided Print40
Vertical White Line on Solid Image of each Color41
Bk Soiling at the Front Edge on the Back Side43
Uneven Density on a Bk Solid Image Due to the Uneven Resistance of ITB44
Uneven Density on the Second Side of a Black Halftone Image46
Edge Soiling Due to a Soiled Fixing Inlet Guide48
Image Failure Occurring Repeatedly at the same Interval (XX Pitch)49
Stains on the Back Side of Paper or Uneven Density at Regular Interval (5.0Mm) Due to the Scraped Drive Shaft When Outputting an Image51
Soiled Edge on the Leading Edge and the Trailing Edge of Paper Caused by Rubbing against the Flapper on the Delivery Reverse Unit57
Uneven Density on the Second Face of a Halftone Image Due to Uneven Distribution of Moisture on Paper Surface58
Gloss Lines on Image Due to the Scratches on the Surface of Fixing Roller Which the Refresh Roller Gives in Its Operation60
Countermeasure against Uneven Density at 10Mm Intervals61
Marks on Image Caused by Friction Due to Mini Gripper Edge (Perfect Binder- B1/D1/E1)63
264Mm Drum Pitch White Band/ White Spots and Streaks on Images Due to Scratches on Cleaner Blade69
Stained Image and Uneven Gloss Due to Breakage of Torsion Spring Pressurizing the Collection Roller71
Stain on Back of Papers and Abnormal Noise at the Secondary Transferassembly Due to Worn out Gears76
Streaks and Stains on Image in Feeding Direction Due to Breakage of the Tension Spring79
Stain on Back of Papers Attributed to Secondary Transfer Cleaning Failure Due to Breakage of Cleaner Front Side Plate81
Measures against Poor Image Density on the Ends of the Front and Rear Sides of the Image88
Fixing Failure Due to Shaved Belt Tension Plate91

Faulty Feeding96

Malfunction112

Jam (Main Unit)129

Jam (Delivery Options)159

Error Code178

Specifications-Related242

Controller Specification262

Brand	Canon
Model	imagePRESS C10000VPSeries
Category	Printer
Language	English

Canon imagePRESS C10000VPSeries - User Manual

Table of Contents

Canon imagePRESS C10000VPSeries Specifications

Related product manuals