Unexpected result of booklet job with External Finisher.
( imagePRESS Server B5100/B4100 )
[Symptom/Question]
When printing a booklet job using cover page insertion, and print it to an External(3rd party) finisher, you will get unexpected
output result, such as wrong page order and/or extra blank pages.
[Cause]
When printing a booket with External Finisher, both MFP and Fiery arrange page order and face up/down control for booklet
imposition. Both processes are conflict each other, as a result, output becomes incorrect.
[Remedy/Answer]
[Workaround]
User can control the output result by selecting appropriate combination of the following settings in both MFP and Fiery job
properties. Please refer to the attached document to find the settings for expected output.
MFP User mode > Function Settings > Common > Paper Output Settings >
- Normal/Rvrse. Order Output with Extrnl Fin.
- Face Up/Face Down Output with Extrnl Fin.
Fiery Job properties > Finishing >
- Output delivery
[Attached file]
Recommended settings for booklet job with External Finisher. (Sample)
[Caution]
- To change the settings for External finisher, you must login to MFP with System Manager account. Otherwise, the settings are
grayed-out and can not be changed.
- If you need to change Service Mode > SORTER > Misc > PRESET, please do it before changing MFP user mode settings. If
you change service mode setting later, please check user mode settings again.
260
To Previous Page
Loading...
