Canon imagePRESS C10000VPSeries - Notification about the Changes in the Upper Cover and Cover Sheet for the 1 St Fixing Assembly and Second Fixing Assembly and about Their Proper Uses

Notification about the changes in the upper cover and cover sheet
for the 1st fixing assembly and second fixing assembly and about
their proper uses
[Details]
In the machine earlier than the following countermeasure cut-inserial numbers in factory, the shapes of the upper cover for the
1st fixing assembly and second fixing assembly as well as the cover sheet attached to the upper cover of the fixing assembly are
changed
[Changes made]
1) The shape of the louver [a] in the upper cover is changed.
[A] is an old type and [B] is a new type.
2) The shape of the cover sheet [a] is changed from the old type [1] to the new type [2]. Due to the changes in shapes of the
upper cover and the cover sheet, how the cover sheet is attached to the upper cover is also changed. The old type cover sheet
[A] is wrapped around the upper cover of the fixing assembly while the new type [B] is affixed on it.
[Remedy/Answer]
When replacing the cover sheet only, refer to the table below and use a proper cover sheet.
DESCRIPTION PART NUMBER
COVER SHEET
FL1-5536-000
OLD TYPE
FL1-5548-000
NEW TYPE
PPER COVER
( 1ST FIXING ASSEMBLY)
FM1-A395-030
(Old type)
YES NO
FM1-A395-040
(New type)
NO YES
UPPER COVER
(SECOND FIXING ASSEMBLY)
FM1-H038-000
(Old type)
YES NO
FM1-H038-010
(New type)
NO YES
[Service parts]
No Part Number Description Q'ty Fig. No.
1
Old FM1-A395-030 COVER, UPPER 1 - > 0
810A
810B
New FM1-A395-040 COVER, UPPER 0 - > 1
2
Old FM1-H038-000 COVER, UPPER 1 - > 0
850A
850B
New FM1-H038-010 COVER, UPPER 0 - > 1
3
Old *FL1-5536-000 SHEET, COVER 1 - > 1
810A,810B
850A,850B
New FL1-5548-000 SHEET, COVER 0 - > 1
253