3. Remove the Sleeve Seal from the Developing Assembly (for black).
CAUTION:
When removing the Sleeve Seal, be careful not to make any crease in the seal.
Otherwise, the Toner Blocking Sheet may be caught and damaged by the crease.
4. Check that there is no developer scattered on the Toner Blocking Sheet (Inner) inside the Toner Blocking Sheet
(Outer). If it is scattered, clean with dry lint-free paper.
Toner Blocking
Sheet (Inner)
Toner Blocking
Sheet (Inner)
Toner Blocking
Sheet (Outer)
2. Host Machine
58
To Next Page
Loading...
Need help?
General