Canon imagePROGRAF iPF6300S Basic Guide No.2 User Manual

•
F Scaling
Resizes the document image based on a specified scaling value. Enter a value in a range of 5–600.
•
G Paper Size
Choose the size of the paper you will print on.
For details on available paper sizes, see "Paper Sizes →P.774 "
•
H Orientation
Choose the printing orientation.
• Making the Original Orientation Match the Paper Orientation →P.190
•
K Rotate Page 90 degrees (Conserve Paper)
Activate this setting to rotate the document image by 90 degrees before printing.
• Conserving Roll Paper by Rotating Originals 90 Degrees
→P.172
•
L Paper Source
Choose the feed source, as desired.
Options displayed in the list vary depending on the selection in Media Type on the Main sheet.
•
M Roll Paper Width
Choose the roll width.
For details on available roll widths, see "Paper Sizes →P.774 "
•
N Roll Paper Options
Complete optional roll paper settings. Click to display the Roll Paper Options dialog box.
Under A Automatic Cutting, you can specify Yes or No and Print Cut Guideline.
• Cutting Roll Paper After Printing →P.196
Select B Banner Printing when printing multiple pages continuously.
• Printing Multiple Pages Continuously →P.144
•
O Size Options
Click to display the Paper Size Options dialog box, which enables you to register additional paper sizes or select the
size system for use.
• Paper Size Options Dialog Box →P.237
•
S
Defaults
Restores all settings on the sheet to the default values.
Windows Software
> Printer Driver >
iPF6300S Page Setup Sheet
3
235

Canon imagePROGRAF iPF6300S Basic Guide No.2 Specifications

General

Brand	Canon
Model	imagePROGRAF iPF6300S Basic Guide No.2
Category	Printer
Language	English