Canon imagePROGRAF iPF6300S Basic Guide No.2 User Manual

If the Display Screen indicates to replace the Ink Tank, replace the Ink Tank. If a message is displayed indicating to check
the remaining ink levels, or after tasks that consume a lot of ink such as large-format printing or head cleaning, check the
remaining levels and replace Ink Tank as needed. (See "Replacing Ink Tanks.") →P.972
When to Replace Ink Tanks
Replace or prepare to replace ink tanks in the following situations.
If a message for checking the ink is shown on the Display Screen
When there is little ink left, the Message Lamp is lit and "Not much ink is left." is shown on the Display Screen. You can
continue to print, but prepare to replace the Ink Tank. (See "Checking Ink Tank Levels.")
→P.978
Before print jobs and maintenance that consume a lot of ink
If little ink is left, there may not be enough for large-format printing, head cleaning, and maintenance, which require a lot of
ink. In this case, replace or prepare to replace the Ink Tank before maintenance.
If a message for ink replacement is shown on the Display Screen
When ink runs out, the Message Lamp flashes, a message regarding Ink Tank replacement is shown on the Display Screen,
and printing is disabled. Replace the Ink Tank at this point.
Maintenance and Consumables
> Ink Tanks >
iPF6300S When to Replace Ink Tanks
11
979

Canon imagePROGRAF iPF6300S Basic Guide No.2 Specifications

General

Brand	Canon
Model	imagePROGRAF iPF6300S Basic Guide No.2
Category	Printer
Language	English