•
Preview
Select the preview display method.
For more information about preview, see "Utilize Three Types of Previews." →P.637
Setting Details
Print Area Layout Displays the print range and the area out of the print range in the layout matching the
Paper Size set.
*You can change the image print position when you drag the image while the cursor
is displayed as .
Image The entire image is displayed.
*You can select the print range when you drag the image while the cursor is dis-
played as .
*When you click the image while the cursor is displayed as
, the selected area is
deselected.
Roll Paper Preview Display the media size and roll paper information on the top in the layout printing on
roll paper.
*To select Roll Paper Preview, select Roll Paper in Paper Source.
•
Print Selected Range
Place a checkmark here to only print the selected range.
Note
• When you select Preview in the Image, then select a portion of the image on the preview display, this
becomes valid.
•
Perform Proof in Preview
Place a checkmark here to simulate the colors of the output product in the preview.
Note
• If Auto (Color) is selected under Output Profile, some media types are enabled.
• If ICC profile is selected under Output Profile, this is always enabled.
• The actual color balance of the print product and the simulation product may differ with some environ-
ments and conditions. In addition, when you have selected an ICC Profile with Output Profile and it is
not compatible with the printer or media that you are using, the color balance of the actual print product
will differ.
•
Image Properties button
When you click the button to open the Image Properties dialog box, where Image Size, Resolution, Bit and
Color Space information of the image imported to Print Plug-In are displayed.
Mac OS X Software
>
Print Plug-In for Photoshop/Digital Photo Professional
>
Preview Area iPF6300S
4
618
To Next Page
Loading...
Need help?
General