Caution
•
Be careful not to drop the roll and hurt yourself when loading it.
•
Be careful not to pinch your fingers between the Roll Holder shaft (a) and the guide grooves (b) when
loading rolls.
Note
•
For instructions on attaching the Roll Holder to rolls, see "Attaching the Roll Holder to Rolls." ➔ P.12
5
Using both hands, pull out the roll evenly on both
ends and insert it in the Paper Feed Slot (a). Advance
the roll until the buzzer sounds.
Important
•
Be careful not to soil the printing surface of roll paper as you insert it in the slot. This may affect the
printing quality. We recommend wearing clean cloth gloves when handling rolls to protect the printing
surface.
•
If the paper is wrinkled or warped, straighten it out before loading it.
•
Load the roll so that there is no gap between
the right edge of the paper and the Roll Holder.
6
Lower the Ejection Guide.
iPF840 Series
Loading Rolls in the Printer
Basic Guide
Handling Paper Handling rolls
17
To Next Page
Loading...
Need help?
General