Note
•
If the Tab Selection screen is not displayed, press the Menu button.
2
Press the OK button.
The Set./Adj. Menu is displayed.
3
Press ▲ or ▼ to select Maintenance, and then press the OK button.
4
Press ▲ or ▼ to select Replace P.head, and then press the OK button.
Ink begins being drawn in. When it finishes, instructions are displayed on the Display Screen.
Replace the Printhead
1
Open the Top Cover.
Instructions are now shown on the Display Screen re-
garding Printhead replacement.
2
If the Printhead Fixer Cover or Printhead Fixer Lever
is dirty, use a damp cloth that you have wrung out
completely to wipe it clean.
iPF840 Series
Replacing the Printhead
Basic Guide
Consumables and Maintenance Printheads
41
To Next Page
Loading...
Need help?
General