Canon imagePROGRAF TM-Series Service Guide
imagePROGRAF TM-Series Service Guide June 2021
Revision 4 Page 5
Table 2 -Hardware Option
2
Printer Stand SD-22 (imagePROGRAF TM-200 without stand only)
Roll Holder Set RH2-28 (imagePROGRAF TM-200 only)
Roll Holder Set RH2-35 (imagePROGRAF TM-305/TM-300 only)
Maintenance Cartridge MC-31 1156C005AB
Cutter Blade CT-08 1155C002AA
Z36 Calibration Target 1691B123AA
Z36 Scanner Glass 1691B124AA
Z36 Document Return Guides (Pack of 3) 1691B126AA
Z36 Keyboard Tray 1691B112AA
Colortrac SC 42c Xpress Scanner (No Stand)
6
1691B088AA
Colortrac Floor Stand 1691B106AA
Colortrac Document Return Guide 1691B107AA
2 Item Numbers and Part Numbers are subject to change without notice.
Table 3 – Contour Cutter
2
Cutter Blade for CE6000 (2pk) 4511C003AA
Teflon Mat for CE6000-60 (2pk) 4511C004AA
Teflon Mat for CE6000-120 (2pk) 4511C005AA
CE7000-60 Plus 24” Contour Cutter and Colorbyte R.E.D. Software 4511C007AA
CE7000-60 Plus Stand (Optional 24” Stand) 4511C008AA
CE7000-130 Plus 50” Contour Cutter and Colorbyte R.E.D. Software 4511C009AA
Teflon Mat for CE7000-60 (2 Pack) 4511C010AA
Teflon Mat for CE7000-130 (2 Pack)
CB15U Blade
7
4511C012AA
PHP33-CB15N-HS Blade Holder
7
4511C013AA
2 Item Numbers and Part Numbers are subject to change without notice.
Table 4 - Software Option
Item Item Number
2
PosterArtist
SmartWorks MFP Plus
Colorbyte IMAGEPRINT R.E.D. Software
2 Item Numbers and Part Numbers are subject to change without notice.
6
Refer to the Colortrac SC 42c Xpress Scanner Service Support Guide to prepare for installation, service and training
requirements.
7
Compatible with the CE7000-60 Plus 24" Contour Cutter and CE7000-130 Plus 50" Contour Cutter.