3
Handling Cautions
Moving the Printer
●Have the following number of people grasp
the carrying grips on each side in the base of
the printer. The weight may cause pain such
as back pain.
TX-5410 (Approx. 96 kg) 6 people or more
TX-5310 (Approx. 87 kg) 6 people or more
TX-5210 (Approx. 74 kg) 6 people or more
For the TX-5410
Standing Up the Printer
●When standing the printer up, place
cardboard or other material underneath to
prevent damage and scratching, and make
sure the side with the operation panel is up.
Furthermore, make sure that the weight of the
printer is taken by the corner of the printer. If
the weight is taken by any other part of the
printer, the printer may become damaged.
●When carrying the printer, firmly grasp the
carrying grips on each side in the base (the
area shown shaded in the diagram). Holding
the printer at other positions is dangerous and
may cause injury or damage to the printer if
the printer is dropped.
●Do not hold any position other than the
carrying grips. In particular, do not hold the
plastic parts of the printer rear surface (the
area shown shaded in the diagram).
Other
●Do not put the printer down or carry the
printer with only the center of the printer
supported. This may cause damage to the
printer.
●When setting the printer down temporarily,
make sure to put the printer on a flat, stable
surface.
To Next Page
Need help?
General