3-20
Print Plug-In for Photoshop
Chapter 3 Utilize Print Plug-In to Print
Enlarge/Reduce and Print
You can enlarge or reduce an image in Print Plug-In.
Three methods to enlarge/reduce and print are as follows.
“Enlarge/Reduce and Print Matching Output Media Size” (p.3-20)
“Enlarge/Reduce and Print Matching Width of Roll Paper” (p.3-23) for W8400PG and
W6400PG
“Specify Scaling, Enlarge/Reduce and Print” (p.3-27)
■ Enlarge/Reduce and Print Matching Output Media Size
You can enlarge/reduce and print the image to match with the print regions of the specified
media set to the printer.
This feature is useful when you need to print on the full width of Media that you have selected.
1. Display the Page Setup sheet.
Note
When you need to print on the full width of roll media, refer to “Enlarge/
Reduce and Print Matching Width of Roll Paper” (p.3-23). When you do the
procedure below to print on roll media, the print job will match the size of the
output with the media selected with the Output Media Size setting.
To Next Page
Loading...
Need help?
General