3-36
Print Plug-In for Photoshop
Chapter 3 Utilize Print Plug-In to Print
1 Drying Time Between Pages
This sets the wait time for the ink to dry between each completely printed sheet and the
output of the next sheet.
2 Drying Time Between Scans
This sets the wait time between line scans during printing.
3 Roll Paper Margin for Safety Near End Margin
This sets the length of the near end margin of the roll paper.
4 Roll Paper Margin for Safety Far End Margin
This sets the length of the far end margin of the roll paper.
Setting Details
Printer Default The settings of the printer operating panel are applied.
None The paper is ejected immediately after printing.
30 sec., 1 min., 3 min.,
5 min., 10 min., 30
min., 60 min.
The sheet is ejected when the specified time after printing
has elapsed.
Setting Details
Printer Default The settings of the printer operating panel are applied.
None The printing continues to the next line immediately after the
last line.
1 sec., 3 sec., 5 sec.,
7sec., 9 sec.
The printing continues to the next line after the set time.
• For Media Type that has problems, such as ink smears on
the page or colors that seem uneven during borderless
printing etc., increase the value for this setting.
Setting Details
Printer
Default
The settings of the printer operating panel are applied.
5 mm Print at a standard size.
• Select for Media Type that has no problem when printing with a
standard size margin.
20 mm This setting sets the margin about 15 mm (in the feed direction) longer
than the standard margin for the media size. This is for Media Type that
has a strong tendency to curl, causing the printhead to scratch the
surface.
Setting Details
Printer
Default
The settings of the printer operating panel are applied.
5 mm Print at a standard size.
• Select for Media Type that has no problem when printing with a
standard size margin.
10 mm This setting sets the margin about 5 mm (in the feed direction) longer
than the standard margin for the media size.
• When printing an image at the very end of the end margin, the cutter
touches the page before the ink has dried and dirties the printed
image.
To Next Page
Loading...
Need help?
General