1-8
imagePROGRAF HDI Driver Guide
HDI Driver Installation
The Add Plotter - Import Pcp or Pc2 screen opens.
10.Click the Next button.
The Add Plotter - Ports screen opens.
11.Make sure that Plot to a port is selected, select the port that you want to use for the plotter,
then click the Next button.
The Add Plotter - Plotter Name screen opens.
If you want the installer to read plotter information from previously stored
PCP or PC2 files, click the Import File button. If you do not want to read
these files, just go to Step 10.
You can change the Plotter Name setting here, but you will normally leave
it as it is and go to Step 12.
Note
Note
To Next Page
Loading...
Need help?
General