1-6
imagePROGRAF HDI Driver Guide
HDI Driver Installation
■ Installing with the Add-A-Plotter Wizard
Follow the procedure below to use the Add-A-Plotter Wizard to install the HDI driver without
the Canon installer.
1. After AutoCAD starts, select Plotter Manager from the File menu.
The Plotters window opens.
2. Click the Add-A-Plotter Wizard icon.
The Add Plotter - Introduction Page screen opens.
3. Check the displayed screen and then click the Next button.
The Add Plotter - Begin screen opens.
To open the Add-A-Plotter Wizard you can also click Start > Settings >
Control Panel > Autodesk Plotter Manager > and then click the Add-A-
Plotter Wizard icon in the Plotters window.
Note
To Next Page
Loading...
