1-5
imagePROGRAF HDI Driver Guide
HDI Driver Installation
11. Click the Next button.
The Add Plotter - Ports screen opens.
12.Make sure that Plot to a port is selected, select the port that you want to use for the plotter,
then click the Next button.
The Add Plotter - Plotter Name screen opens.
13.Click the Next button.
The Add Plotter - Finish screen opens.
14.Click the Finish button.
This completes the installation of the HDI driver.
15.Clicking the Finish button closes the Installation List and Setup Menu and ejects the User
Software CD-ROM from the CD-ROM drive.
You can change the Plotter Name setting here, but you will normally leave
it as it is and go to Step 13.
Note
To Next Page
Loading...
