How to fix 'Out of Toner Change Toner' on Canon All in One Printer?
If your Canon All in One Printer displays 'OUT OF TONER CHANGE TONER', first, ensure the toner cartridge is correctly installed. If the message persists, it's likely the toner has completely run out, and you'll need to replace the toner cartridge.
What to do if my Canon All in One Printer says 'Paper Jam'?
If your Canon All in One Printer shows 'PAPER JAM', it means paper is stuck inside the machine. You should remove the jammed paper. Remember to open and close the cover to resume your print job.
What does 'Feeder Paper Jam Check the Feeder' mean on Canon All in One Printer?
If your Canon All in One Printer displays 'FEEDER PAPER JAM CHECK THE FEEDER', it indicates a document jam in the ADF (Automatic Document Feeder). Remove the jammed document from the feeder.
What to do if my Canon All in One Printer has paper jams?
To fix paper jams in your Canon All in One Printer, first remove any jammed paper from inside the machine. If needed, check and remove any jammed paper from the paper drawer.
How to troubleshoot 'System Error' on Canon All in One Printer?
If your Canon All in One Printer displays 'SYSTEM ERROR', turn off the main power switch, wait for more than 10 seconds, and then turn it back on. If the message continues to appear, unplug the printer from the power supply.
Why does my Canon All in One Printer say 'Memory Full'?
If your Canon All in One Printer displays 'MEMORY FULL', it means the printer's memory is full of jobs. Try printing, sending, or deleting documents stored in the memory. If the number of transmission/reception jobs has reached the maximum, divide the document or data into smaller parts and try again.
How to resolve 'Change Paper Size' error on Canon All in One Printer?
If your Canon All in One Printer displays 'CHANGE PAPERSIZE', it means the paper size in the paper drawer or stack bypass doesn't match the size specified in the settings menu. Load paper of the size shown on the LCD display. Alternatively, if you're printing a report or list, set the paper size to LTR or LGL and load paper of the corresponding size.
What does 'Received in Memory' mean on Canon All in One Printer?
If your Canon All in One Printer displays 'RECEIVED IN MEMORY', it means the printer received a fax/I-fax in memory because of a paper or toner issue, or incorrect paper size. Load the correct paper size, replace the toner cartridge, or clear any paper jams.
What to do if Canon All in One Printer displays 'Document Too Long'?
If your Canon All in One Printer displays 'DOCUMENT TOO LONG', the document fed from the ADF is either too long (over 24 7/8" or 630 mm) or isn't feeding correctly. Try scanning the document on the platen glass. Alternatively, reduce the document's length to within 24 7/8" (630 mm) and try again.
What does 'Check Document' mean on Canon All in One Printer?
If your Canon All in One Printer displays 'CHECK DOCUMENT', it might mean a document jam has occurred in the ADF. Remove the jammed document from the feeder.
General| Functions | Print, Copy, Scan |
|---|---|
| Print Speed (A4) | 19 ppm |
| Print Resolution | 600 x 600 dpi |
| Paper Output | 100 sheets |
| Duplex Printing | Manual |
| Copy Speed (A4) | 19 cpm |
| Copy Resolution | 600 x 600 dpi |
| Scanner Type | Flatbed |
| Interface | USB 2.0 |
| Connectivity | USB |
| Type | Monochrome Laser |
| Paper Input (Standard) | 250 sheets |
| Paper Sizes | A4, A5, B5 |
| Multiple Copy | Up to 99 copies |
| Scan Resolution | 600 x 600 dpi |
| Scan to | USB |
| Supported Operating Systems | Windows 2000/XP/Vista/7, Mac OS X |
| Paper Weight | 64 to 128 g/m² |
To Next Page