Canon imageRunner 1133 User Manual

Logging in to the Machine
EN-8
English
Logging in to the Machine
This section describes the operation procedures for the log-in methods provided by
the uniFLOW integration.
NOTE
When the optional MiCard Reader is attached to the machine, you can log in and log
out by holding your ID card over the MiCard Reader, regardless of the applied log-in
method (except when the department ID and PIN is applied as the log-in method).
Entering a User ID and Password
Enter your user ID and password to log in when the screen shown in step 1 is
displayed.
NOTE
To log in to the machine, you must have a valid user ID and password (if set)
registered. For instructions on how to register a user ID and password in the uniFLOW
server, see the documentation included with the uniFLOW software.
1 Enter your user ID and password
(up to 32 characters respectively)
using the numeric keys.
❑ Select <User ID> using [ ] or [ ] and
press [OK].
❑ Enter your user ID.
You can change the text entry mode by
changing <Entry Mode>.
❑ Select <Apply> using [ ] or [ ] and
press [OK].
Enter User ID & Pswrd
Login: Press ID
Logout: Press ID
User ID:
Password:
User ID
User01
<Apply>
Entry Mode: 12

Canon imageRunner 1133 Specifications

General

Print Speed	33 ppm
Print Resolution	600 x 600 dpi
Memory	256 MB
Type	Monochrome Laser Multifunctional
Copy Speed	33 cpm
Copy Resolution	600 x 600 dpi
Multiple Copy	Up to 99 copies
Scan Resolution	600 x 600 dpi
Interface	USB 2.0, Ethernet
Copy Magnification	25-400%
Maximum Paper Size	A4
Duplex Printing	Yes
Connectivity	USB, Ethernet
Paper Sizes	A4, A5, B5, Legal, Letter
Zoom	25% - 400%
Scan to	Email, USB
First Copy Time	Approx. 8 seconds