Specifying Common Settings
4-49
4
Customizing Settings
Setting the Speed or Print Side Priority
You can set whether the printer speed is the priority for your job, or whether to print
on a specific side of the paper. This is useful when you want to make one- or
two-sided prints on preprinted paper (paper which has logos or patterns already
printed on it) without changing the orientation of the paper of the paper loaded in a
paper source.
NOTE
The default setting for all the paper sources is ‘Speed’.
1
Press (Additional Functions) ➞ [Common Settings].
If necessary, see the screen shot in step 1 of “Initial Function at Power ON,” on
p. 4-17.
2
Press [▼] or [▲] until [Paper Feed Method Switch] appears ➞
press [Paper Feed Method Switch].
To Next Page
Loading...
Need help?
General
