Adjusting the Machine
4-81
4
Customizing Settings
Adjusting Output Speed in the Rotate Collate Mode
Printing with the Rotate Collate mode involves two different paper sources, and a
certain wait time is required to switch them. You can make this wait time shorter or
longer by selecting whether to give priority to the speed or image quality.
NOTE
The default setting is ‘Speed Priority 1’.
1
Press (Additional Functions) ➞ [Adjustment/Cleaning].
If necessary, see the screen shot in step 1 of “Improving Print Quality and Density
(Special Mode M),” on p. 4-70.
2
Press [▼] or [▲] until [Rotate Collate Adjustment] appears ➞
press [Rotate Collate Adjustment].
To Next Page
Loading...
Need help?
General
