System Management Settings
3EEJ-02E
All the settings about System Management Settings are listed with short
descriptions. Default settings ar
e marked with a dagger (
).
If a screen for entering a PIN is displayed
Enter the PIN and tap <Apply>. Setting the System Manager PIN(P. 91)
Asterisks (
*
)
Settings mark
ed with "
*1
" may be unavailable or vary or have different defaults depending on your country or
region.
System Manager Information Settings(P. 114)
Select Country/Region(P. 114)
Auto Online for Remote Scan(P. 115)
Display Job Log(P. 115)
Use as USB Device(P. 115)
PDL Selection (Plug and Play)(P. 116)
Update Firmware(P. 116)
Initialize Menu(P. 117)
Initialize All Data/Settings(P. 117)
System Manager Information Settings
Specify the PIN e
xclusively for Administrators who have access privileges to <System Management Settings>. You can
set the PIN from <System Manager PIN>.
Setting the System Manager PIN(P. 91)
System Manager PIN
Enter a number of up to seven digits for the System Manager PIN.
Select Country/Region
*1
Specify the country or r
egion where the machine is used. The default setting may vary depending on the setting
selected at initial power-on.
Austria (AT)
Belarus (B
Y)
Belgium (BE)
Czech Republic (CZ)
Denmark (DK)
Egypt (EG)
Finland (FI)
France (FR)
Netherlands (NL)
Norway (NO)
Poland (PL)
Portugal (PT)
Russia (RU)
Saudi Arabia (SA)
Slovenia (SI)
South Africa (ZA)
Setting Menu List
114
To Next Page
Loading...
Need help?
General
