Canon imageRUNNER 2520i User Manual

Installation Location and Handling
1-4
Machine Installation
1
Select a Safe Power Supply
■ Avoid locations where a considerable amount of dust accumulates.
■ Avoid locations near volatile or flammable materials, such as alcohol or
paint thinner.
■ Avoid installing the machine near computers or other precision electronic
equipment.
Electrical interference and vibrations generated by the machine during printing can
adversely affect the operation of such equipment.
■ Avoid installing the machine near televisions, radios, or similar electronic
equipment.
The machine may interfere with sound and picture signal reception. Insert the power plug
into a dedicated power outlet, and maintain as much space as possible between the
machine and other electronic equipment.
■ Do not remove the machine’s leveling feet.
Do not remove the machine’s leveling feet after the machine has been installed. If you put
weight on the front of the machine while the drawers or units within the machine are pulled
out, the machine may fall forward. To prevent this from happening, make sure that the
machine’s leveling feet are in place.
■ Contact an authorized Canon dealer if communication is unavailable.
Depending on your locale or your telephone connection, you may be unable to perform
data communication. In this case, contact your local authorized Canon dealer.
■ Plug the machine into a standard 220 - 240 V AC, three-wire grounded
outlet.
■ Make sure that the power supply for the machine is safe, and has a steady
voltage.
■ Do not connect other electrical equipment to the same power outlet to
which the machine is connected.
■ Do not connect the power cord to a multiplug power strip, as this may
cause a fire or electrical shock.
■ The power cord may become damaged if it
is often stepped on or if heavy objects are
placed on it. Continued use of a damaged
power cord can lead to an accident, such
as a fire or electrical shock.
■ The power cord should not be taut, as this
may lead to a loose connection and cause
overheating, which could result in a fire.

Canon imageRUNNER 2520i Specifications

General

Type	Monochrome Laser Multifunctional
Print Speed	20 ppm (A4)
Print Resolution	600 x 600 dpi
First Print Time	6.4 seconds
Interface	USB 2.0, 10/100Base-TX Ethernet
Paper Output	100 sheets
Copy Speed	20 cpm (A4)
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Maximum Paper Size	A4
Functions	Print, Copy, Scan
Warm-up Time	Less than 30 seconds
Memory	256 MB
Paper Input (Standard)	250-sheet cassette
Supported Media Sizes	A4, A5, B5, Legal, Letter, Executive
Supported Media Weights	64 to 90 g/m²
Duplex Printing	Yes
Multiple Copy	1-99 copies
Zoom	25% to 400%
Scan Speed	20 ipm
Scan to	Email
Fax	Optional
Operating System Compatibility	Windows, Mac OS, Linux