EasyManuals Logo

Canon imageRUNNER 2520i User Manual

Canon imageRUNNER 2520i
118 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #37 background imageLoading...
Page #37 background image
Cable Connection
1-10
Machine Installation
1
CAUTION
Before you connect the USB cable to the machine while the main power switch
is ON, make sure that the ground line is connected. If the ground line is not
connected, connecting the USB cable to the machine while the main power
switch is ON may result in electric shock.
If you connect or disconnect the USB cable while the main power switch is ON,
do not touch the metal parts around the connector. Doing so may result in
electric shock.
IMPORTANT
To prevent your machine or computer from operating poorly, do not connect or
disconnect the USB cable in the following situations:
- The drivers are being installed.
- The computer is booting up.
- The machine is printing.
If you disconnect the USB cable from the machine or computer that is turned ON,
always wait at least 10 seconds before reconnecting the cable. Immediately
reconnecting the cable may cause your machine or computer to operate poorly.
Make sure that the Use USB Device setting is enabled. (See Chapter 7, “Other
System Settings,” in the System Settings Guide.)
With the USB connection, you cannot use the Remote UI or the Remote Scan
function. Some utilities are also not functional if the machine is connected to a
computer via the USB cable.
NOTE
The appropriate USB interface for Windows 2000/XP/Vista/7/Server 2003/Server
2008 is USB 2.0 Hi-Speed/USB Full-Speed (USB 1.1 equivalent). For Mac OS X
10.3.2 or earlier is USB Full-Speed (USB 1.1 equivalent) and Mac OS X 10.3.3 or later
is USB 2.0 Hi-Speed/USB Full-Speed (USB 1.1 equivalent). For more information,
consult your local authorized Canon dealer.
Sharing the Machine with Other Network Users
The machine supports TCP/IP, which enables it to be shared by multiple network
users. The machine supports both 10BASE-T and 100BASE-TX connections that
can be used in most LANs.
Using Ethernet
Connect the machine’s LAN port to a hub port using the following types of cable:
- When connecting to a computer with a 10BASE-T port: a Category 3 (or higher)
twisted pair LAN cable
- When connecting to a computer with a 100BASE-TX port: a Category 5 (or
higher) twisted pair LAN cable

Table of Contents

Other manuals for Canon imageRUNNER 2520i

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Canon imageRUNNER 2520i and is the answer not in the manual?

Canon imageRUNNER 2520i Specifications

General IconGeneral
TypeMonochrome Laser Multifunctional
Print Speed20 ppm (A4)
Print Resolution600 x 600 dpi
First Print Time6.4 seconds
InterfaceUSB 2.0, 10/100Base-TX Ethernet
Paper Output100 sheets
Copy Speed20 cpm (A4)
Copy Resolution600 x 600 dpi
Scan Resolution600 x 600 dpi
Maximum Paper SizeA4
FunctionsPrint, Copy, Scan
Warm-up TimeLess than 30 seconds
Memory256 MB
Paper Input (Standard)250-sheet cassette
Supported Media SizesA4, A5, B5, Legal, Letter, Executive
Supported Media Weights64 to 90 g/m²
Duplex PrintingYes
Multiple Copy1-99 copies
Zoom25% to 400%
Scan Speed20 ipm
Scan toEmail
FaxOptional
Operating System CompatibilityWindows, Mac OS, Linux

Related product manuals