System Configuration
4-6
Optional Equipment
4
Available Combination of Options
The table below lists the optional equipment for the machine and includes
information about the purposes and compatibility with other options.
Optional Equipment Purpose Remarks
Feeder
(DADF-AA1/-AB1)
Scanning originals
The Feeder (DADF-AA1/-AB1) and the
Platen Cover Type Q/P cannot be installed
together. If the platen cover is attached,
some functions may be unavailable.
Platen Cover Type Q/P
Protection cover for
the platen glass
Inner Finisher-B1
Finishing (Collate,
Group, Offset, and
Staple)
For the imageRUNNER 2530/2525/2520i/
2520, the 2 Way Unit-B1 is also required.
The Inner Finisher-B1 cannot be used with
the Inner 2 Way Tray-G1.
Inner Finisher
Additional Tray-B1
Additional output
tray for the finisher
The Inner Finisher-B1 is required.
Inner 2 Way Tray-G1
Additional output
tray
For the imageRUNNER 2530/2525/2520i/
2520, the 2 Way Unit-B1 is also required.
The Inner 2 Way Tray-G1 cannot be used
with the Inner Finisher-B1.
Cassette Module-W1/
CST. Feeding Unit-AE1
Additional paper
supply
The Cassette Module-W1 is optional for the
imageRUNNER 2520i/2520.
The Cassette Spacer-A1 is required in
order to attach these options to the
imageRUNNER 2520i/2520.
Cassette Spacer-A1
Spacer for the
Cassette
Module-W1/CST.
Feeding Unit-AE1
The Cassette Spacer-A1 is optional for the
imageRUNNER 2520i/2520.
Copy Card Reader-F1
Department ID
Management
The Card Reader Attachment-D3 is
required in order to attach the Copy Card
Reader-F1 to the machine.