Canon imageRUNNER 2545i Reference Guide

Logging in to the Machine
2-12
Basic Operations
2
Entering a User ID and Password
If User ID Management has been set, you must enter your user ID (and password)
to log in to the machine.
IMPORTANT
To log in to the machine, you must have a valid user ID (and password) registered in
the machine beforehand. For instructions on how to register a user ID and password,
see Chapter 3, “Specifying Department ID and User Management,” in the Remote UI
Guide.
NOTE
• If no password is set for the user ID, leave [Password] blank.
• If you make a mistake when entering the user ID/password, press (Clear) ➞ enter
the correct ID/password.
• You can also use a standard USB keyboard to enter characters. (See “Entering
Characters Using a USB Keyboard,” on p. 2-7.)
2 When your operations are
complete, remove the control
card from the card slot.
NOTE
You can remove the control card
before all the jobs in the machine’s
memory are complete. The machine
automatically logs out as soon as
these jobs are complete.
1 Enter your user ID and password
(up to 32 digits respectively)
using the on-screen keyboard
and - (numeric keys).
❑ Press [User ID] ➞ enter your user ID ➞
press [OK].
❑ Press [Password] ➞ enter the password
➞ press [OK].
The characters that you enter for the
password are displayed as asterisks
(********).

Canon imageRUNNER 2545i Specifications

General

Type	Multifunction Printer
Print Speed (Black & White)	45 ppm
Print Resolution	1200 x 1200 dpi
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Scanning Speed	Up to 45 ipm
Monthly Duty Cycle	150, 000 pages
Memory	2 GB
Maximum Paper Size	A3
Duplex Printing	Automatic
Multiple Copies	Up to 999 copies
Operating System Compatibility	Windows, macOS, Linux
Functions	Print, Copy, Scan
Copy Speed (Black/White)	45 ppm
Hard Disk Drive	Optional
Standard Paper Capacity	550 sheets
Paper Sizes	A4, A5, B5, Legal, Letter
Magnification	25% - 400%
Connectivity	USB, Ethernet, Wi-Fi
Power Consumption	1.5 kW
Paper Weights	64 to 256 g/m²