Canon imageRUNNER 2545i Reference Guide

Specifying Common Settings
3-31
Configuring the Machine’s Basic Settings
3
Specifying A5R/STMTR Paper
Specify A5R or STMTR when paper of these sizes is loaded in the paper drawers.
NOTE
The default setting is ‘A5R’.
1 Press (Additional Functions) ➞ [Common Settings].
For help, see steps 1 and 2 in “Initial Function at Power ON,” on p. 3-2.
4 Open the paper drawer and then close it.
The selected mode is set.
5 Press (Reset) to return to the top screen.
2 Press [ ] or [ ] until
[A5R/STMTR Paper Selection]
appears ➞ press [A5R/STMTR
Paper Selection].
3 Press [A5R] or [STMTR] for each
paper source to select the
desired paper size ➞ press [OK].
The available paper sources can be
identified by the following icons:
: Drawer 1
: Drawer 2 (optional for the
imageRUNNER 2520i/2520)
: Drawer 3 (optional)
: Drawer 4 (optional)

Canon imageRUNNER 2545i Specifications

General

Type	Multifunction Printer
Print Speed (Black & White)	45 ppm
Print Resolution	1200 x 1200 dpi
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Scanning Speed	Up to 45 ipm
Monthly Duty Cycle	150, 000 pages
Memory	2 GB
Maximum Paper Size	A3
Duplex Printing	Automatic
Multiple Copies	Up to 999 copies
Operating System Compatibility	Windows, macOS, Linux
Functions	Print, Copy, Scan
Copy Speed (Black/White)	45 ppm
Hard Disk Drive	Optional
Standard Paper Capacity	550 sheets
Paper Sizes	A4, A5, B5, Legal, Letter
Magnification	25% - 400%
Connectivity	USB, Ethernet, Wi-Fi
Power Consumption	1.5 kW
Paper Weights	64 to 256 g/m²