Canon imageRUNNER 2545i Reference Guide

Specifying Common Settings
3-27
Configuring the Machine’s Basic Settings
3
Displaying a Feeder Error Message Prompt
If the feeder is not clean, the machine may scan and print dust and grime on the
output. You can set the machine to prompt you to clean the scanning area when the
machine detects streaks or stains.
IMPORTANT
This mode is available only when the machine is equipped with the feeder (optional for
the imageRUNNER 2545/2535/2530/2525/2520).
NOTE
• The feeder error message prompt appears when originals are placed in the feeder.
• The default setting is ‘On’.
1 Press (Additional Functions) ➞ [Common Settings].
For help, see steps 1 and 2 in “Initial Function at Power ON,” on p. 3-2.
4 Press (Reset) to return to the top screen.
2 Press [ ] or [ ] until
[Error Display for Dirty Feeder]
appears ➞ press
[Error Display for Dirty Feeder].
3 Press [On] or [Off] to enable or
disable the feeder error message
prompt ➞ press [OK].
The selected mode is set.

Canon imageRUNNER 2545i Specifications

General

Type	Multifunction Printer
Print Speed (Black & White)	45 ppm
Print Resolution	1200 x 1200 dpi
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Scanning Speed	Up to 45 ipm
Monthly Duty Cycle	150, 000 pages
Memory	2 GB
Maximum Paper Size	A3
Duplex Printing	Automatic
Multiple Copies	Up to 999 copies
Operating System Compatibility	Windows, macOS, Linux
Functions	Print, Copy, Scan
Copy Speed (Black/White)	45 ppm
Hard Disk Drive	Optional
Standard Paper Capacity	550 sheets
Paper Sizes	A4, A5, B5, Legal, Letter
Magnification	25% - 400%
Connectivity	USB, Ethernet, Wi-Fi
Power Consumption	1.5 kW
Paper Weights	64 to 256 g/m²