Canon imageRUNNER 2545i System Settings Guide

Specifying Communications Settings
4-5
Setting the Send Function
4
1 Press (Additional Functions) ➞ [System Settings] ➞
[Communications Settings].
For help, see “E-Mail/I-Fax Settings,” on p. 4-2.
4 Press (Reset) to return to the top screen.
R-Key Setting
If your machine is connected through a PBX (Private Branch Exchange), it is
necessary to set the access method. You can set the PBX type to ‘Prefix’ or
‘Hooking’.
IMPORTANT
This setting is available only when the optional Super G3 Fax Board-AG1 is attached
to the machine.
2 Press [Fax Settings].
3 Select the desired Send Start
Speed and Receive Start Speed
by pressing each drop-down list
➞ press [OK].
If your document transmission or reception
is slow in starting, this may mean that the
telephone lines in your area are in poor
condition. Select a slower speed. You can
select [33600 bps], [14400 bps], [9600
bps], [7200 bps], [4800 bps], or [2400
bps].

Canon imageRUNNER 2545i Specifications

General

Type	Multifunction Printer
Print Speed (Black & White)	45 ppm
Print Resolution	1200 x 1200 dpi
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Scanning Speed	Up to 45 ipm
Monthly Duty Cycle	150, 000 pages
Memory	2 GB
Maximum Paper Size	A3
Duplex Printing	Automatic
Multiple Copies	Up to 999 copies
Operating System Compatibility	Windows, macOS, Linux
Functions	Print, Copy, Scan
Copy Speed (Black/White)	45 ppm
Hard Disk Drive	Optional
Standard Paper Capacity	550 sheets
Paper Sizes	A4, A5, B5, Legal, Letter
Magnification	25% - 400%
Connectivity	USB, Ethernet, Wi-Fi
Power Consumption	1.5 kW
Paper Weights	64 to 256 g/m²