Canon imageRUNNER 2545i System Settings Guide

Setting Port Numbers
3-38
Setting up the Machine for Your Network Environment
3
Setting Port Numbers
Depending on your network environment, you can change the port number for each
protocol.
IMPORTANT
• <SMTP Receive>, <POP3 Receive>, <FTP Sending>, and <SMTP Sending> are
available only when the Send function (optional for the imageRUNNER 2545/2535/
2530/2525/2520) is activated.
• Changes made to Port Number Settings become effective when the machine is
restarted. To restart the machine, turn it OFF, wait at least 10 seconds, and then turn it
ON. For instructions on how to turn the machine ON and OFF, see Chapter 2, “Before
You Start Using the Machine,” in the User’s Guide.
NOTE
The default settings are as follows:
- LPD: 515
- RAW: 9100
-HTTP: 80
-SMTP Receive: 25
- POP3 Receive: 110
- FTP Sending: 21
- SMTP Sending: 25
-SNMP: 161
- WSD: 3702
- HTTPS: 443
1 Press (Additional Functions)
➞ [System Settings] ➞ [Network
Settings].

Canon imageRUNNER 2545i Specifications

General

Type	Multifunction Printer
Print Speed (Black & White)	45 ppm
Print Resolution	1200 x 1200 dpi
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Scanning Speed	Up to 45 ipm
Monthly Duty Cycle	150, 000 pages
Memory	2 GB
Maximum Paper Size	A3
Duplex Printing	Automatic
Multiple Copies	Up to 999 copies
Operating System Compatibility	Windows, macOS, Linux
Functions	Print, Copy, Scan
Copy Speed (Black/White)	45 ppm
Hard Disk Drive	Optional
Standard Paper Capacity	550 sheets
Paper Sizes	A4, A5, B5, Legal, Letter
Magnification	25% - 400%
Connectivity	USB, Ethernet, Wi-Fi
Power Consumption	1.5 kW
Paper Weights	64 to 256 g/m²