Canon imageRUNNER 2545i System Settings Guide

System Requirements
1-18
Before You Start
1
Checking Your Network Environment
The diagram below shows an example network. Confirm the details of the network
environment connected to the machine, and then perform the necessary
operations.
Use TCP/IP to set up the network connected to the machine.
In addition to IPv4 (Internet Protocol Version 4), the machine also supports IPv6
(Internet Protocol Version 6), and has a dual stack configuration that enables it to
communicate with both IPv4 and IPv6 networks. The functions of IPv4 are always
enabled, and you can select whether to use the functions of IPv6.
For details, see Chapter 2, “Connecting the Machine to a TCP/IP Network.”
IMPORTANT
If you want to use the machine as a network scanner, it must be connected to a
computer over an IPv4 network.
NOTE
The sample network connection diagram above shows a Windows-based network
environment. The machine works best in a Windows-only environment, but can be
used in a network of different operating systems as well, including Windows, UNIX,
Linux, and Mac OS X. (See “System Requirements,” on p. 1-14.)
Windows 2000 Windows XP
Protocol: TCP/IP
The Machine
Windows Server 2008
Windows Vista

Canon imageRUNNER 2545i Specifications

General

Type	Multifunction Printer
Print Speed (Black & White)	45 ppm
Print Resolution	1200 x 1200 dpi
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Scanning Speed	Up to 45 ipm
Monthly Duty Cycle	150, 000 pages
Memory	2 GB
Maximum Paper Size	A3
Duplex Printing	Automatic
Multiple Copies	Up to 999 copies
Operating System Compatibility	Windows, macOS, Linux
Functions	Print, Copy, Scan
Copy Speed (Black/White)	45 ppm
Hard Disk Drive	Optional
Standard Paper Capacity	550 sheets
Paper Sizes	A4, A5, B5, Legal, Letter
Magnification	25% - 400%
Connectivity	USB, Ethernet, Wi-Fi
Power Consumption	1.5 kW
Paper Weights	64 to 256 g/m²