Adding Front and Back Covers, Sheet Insertions and Chapter Pages to Copy Sets
(Cover/Sheet Insertion)
2-5
Useful Copy Functions
2
Adding Front and Back Covers, Sheet Insertions
and Chapter Pages to Copy Sets (Cover/Sheet Insertion)
This function enables you to set the machine to automatically add front and back covers,
sheet insertions, or chapter pages using a different type of paper from which is used for the
main text. In addition, the front and back covers and sheet insertions can also be copied on.
IMPORTANT
• When the machine is operating in the Cover/Sheet Insertion mode, you cannot use the Group,
Offset Group, Rotate Collating, Rotate Grouping, Saddle Stitch, Book 2-Sided, Two-page
Separation, Booklet, Transparency Interleaving, Image Combination, Image Separation, Image
Repeat, or Mirror Image modes.
• When Finisher-J1 (option) is attached, you cannot staple more than 30 sheets (LTR and LTRR),
20 sheets (LGL), or 15 sheets (11" x 17") of output paper, including sheet insertions.
• When Saddle Finisher-G1 (option) is attached, you cannot staple more than 50 sheets (LTR and
LTRR), or 25 sheets (11" x 17" and LGL) of output paper, including sheet insertions.
NOTE
•
When copying on the front and back covers/sheet insertions, and chapter pages, these sheets are
included in the count of the total number of copies.
•
When copying on chapter pages, these sheets are included in the count of the total number of
copies.
■ Front Cover
Adds a front cover sheet to each set of copies. The cover sheet can also be copied on.
REPORT REPORT
Printed front cover selected in the Cover/Sheet Insertion mode
CopyOriginal
To Next Page
Loading...
Need help?
General
