imageRUNNER ADVANCE 8500 and 8500 II Series Customer Expectations Document
Version 7 imageRUNNER ADVANCE 8500 and 8500 II Series Customer Expectations Document Page 80
6.26 Printer Software Specifications
Operating Modes
Auto, PS, PCL, XPS, Imaging, and PDF
Resident Fonts
PCL
93 Scalable fonts, 2 OCR fonts, and Andale Font
53
(Japanese, Korean,
Simplified Chinese, and Traditional Chinese)
Direct Print Kit
Japanese Fonts
54
:
2 Heisei fonts (Heisei Mincho W3 and Heisei Kaku
Gothic W5)
54
Printable Area
PCL5c, PCL6
Reduced to 1/6” (4.23 mm) from the top, bottom, left, and right edges
PostScript 3
Reduced to 1/6” (4 mm) from the top, bottom, left, and right edges of
NOTE
• When printing in the Expand Print Region and Print mode, the printable area is
enlarged. The upper margin becomes 1/8” (2.5 mm), the lower margin becomes
1/8” (2.5 mm), and the side margins become 1/8” (2.5 mm).
• When an original has data that extends all the way to the edges, even if the
Expand Print Region and Print mode are selected, the periphery of the data may
be cut off. In this case, specify the reduction ratio in the printer driver, so that the
data is not cut off, and try to print again.
53 The optional PCL International Font Set must be activated to use Andale and WorldType Collection, or Andale
Mono WT fonts.
54 These fonts are for use with PDF files.
To Next Page
Loading...
Need help?
General
