7
Holding the Roll Holder flange (a), remove the
holder from the Roll Holder Slot.
Note
• For instructions on removing the Roll Holder from rolls, see "Removing the Roll Holder from Rolls."
→
User's Guide
8
Lower the Ejection Guide and close the Top Cover.
Note
• To load new paper in the printer at this point, see "Loading Rolls in the Printer."
→
P.11
• Clean inside the top cover before loading paper.
(See "Cleaning Inside the Top Cover.")
→
P.53
iPF8400
Removing the Roll from the Printer
Basic Guide
Handling Paper Handling rolls
17
To Next Page
Loading...
