What to do if the Canon All in One Printer's memory is full?
To resolve the issue of a full machine memory on your Canon All in One Printer, try changing the mode setting in the printer driver and attempt printing again. Alternatively, reduce the complexity of the print job by decreasing the number of fonts or macros being downloaded to the machine.
What to do if an internal error has occurred for the Canon All in One Printer function?
If an internal error has occurred for the printer function of your Canon All in One Printer, perform a printer reset to try to initialize the function again. If this error persists, contact a service representative.
What to do if an error occurred during the initialization of the Canon All in One Printer function?
If an error occurred during the initialization of the printer function on your Canon All in One Printer, perform a printer reset to try to initialize the function again. If this error persists, contact a service representative.
What to do if an internal error has occurred on Canon All in One Printer?
If an internal error has occurred on your Canon All in One Printer, perform a printer reset to try to initialize the function again. If this error persists, contact a service representative.
What to do if an error occurred during Canon All in One Printer initialization?
If an error occurred during printer initialization on your Canon All in One Printer, and the initialization could not be performed correctly, try to initialize again. If the error still occurs, perform a reset and try to initialize again. If the problem still persists, contact a service representative.
What to do if data remaining in Canon All in One Printer’s memory?
If data remains in the Canon All in One Printer’s memory, indicated by the Processing/Data lamp flashing or lit, print out the data.
What to do if the command that identifies the end of the data has not been sent from the PC to Canon All in One Printer?
If the command that identifies the end of the data has not been sent from the PC for your Canon All in One Printer (The Processing/Data lamp is flashing or lit.), clear the print data.
What to do if a full page of data, without a border, was printed from Canon All in One Printer?
If a full page of data, without a border, was printed from your Canon All in One Printer, insert a border greater than 5 mm (3/16 in.) around the data and print the data again.
What to do if Margin, Offset X or Offset Y in Canon All in One Printer settings menu have been changed?
If the Margin, Offset X or Offset Y settings in the Canon All in One Printer settings menu have been changed, set Margin, Offset X and Offset Y to 0.0 and print the data again.
What to do if the Timeout setting is too short on Canon All in One Printer?
If the Timeout setting is too short when the Personality setting is set to Auto on your Canon All in One Printer, change the Personality setting to a setting other than Auto, or increase the Timeout setting.
Details on Class 1 laser product safety and precautions.
General cautions and warnings regarding product operation and maintenance.
Explains what menu functions are and how they are set.
Guidance on interpreting and clearing error messages.
Solutions for issues like meaningless characters, incorrect fonts, or printing failures.
Addresses problems related to printout density and toner usage.
General| Copy Resolution | 600 x 600 dpi |
|---|---|
| Scan Resolution | 600 x 600 dpi |
| Memory (Standard) | 128 MB |
| Functions | Print, Copy, Scan |
| Print Speed | 33 ppm |
| Paper Capacity (Standard) | 550 sheets |
| Paper Sizes | A3, A4, A5, B4, B5, Legal, Letter, Executive |
| Duplex Printing | Yes |
| Document Feeder | 50 sheets |
| Connectivity | USB 2.0, Ethernet |
| Hard Disk Drive | Optional |
| Operating System Compatibility | Windows, Mac |
To Next Page
