Canon iR5000i - Adjusting the Position of the Scanner Mirror Base; After Replacing the Scanning Lamp; Scanning System; Replacing the Scanner Drive Cable

COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON iR5000i/iR6000i REV.0 JUNE 2001
CHAPTER 3 STANDARDS AND ADJUSTMENTS
3-7 T
2. Scanning System
2.1 Replacing the Scanner Drive Cable
See the Reader Manual: Chap. 2>5. “Disassembly/Assembly”
2.2 Adjusting the Position of the Scanner Mirror Base
See the Reader Manual: Chap. 2> 5. “Disassembly/Assembly”
2.3 After Replacing the Scanning Lamp
See the Reader Manual: Chap. 2>5. “Disassembly/Assembly”