Need help?Do you have a question about the Canon iR5055 Series and is the answer not in the manual?
Details machine specifications, including part names, usage, user modes, safety, and function lists.
Step-by-step guide for unpacking the machine, installing components, and performing initial checks.
Procedures for verifying network connectivity using PING commands and remote host addresses.
Steps to diagnose and resolve network connection failures, including checking cables and using loopback addresses.
Explains basic operation sequences at power-on (30-sec, low-temp, high-humidity) and during copying/printing.
Explains the start-up sequence, including self-diagnosis and boot program execution.
Describes the procedure for safely shutting down the machine to prevent HDD damage.
Step-by-step instructions for replacing major components like the main controller PCB, SDRAM, and HDD.
Explains the basic sequences of operation for scanning, including power-on and start key press.
Provides procedures for replacing components of the original exposure system, including CCD unit and scanning lamp.
Explains the basic sequence of operation for laser exposure.
Provides procedures for replacing parts of the laser exposure system, such as the laser scanner unit.
Explains the basic sequences of operation at power-on and during printing.
Step-by-step procedures for replacing various parts of the image formation system.
Explains the basic pickup sequences from the right deck and cassette 3.
Covers jam detection outlines, history, delay jams, and stationary jams.
Provides step-by-step procedures for replacing various parts of the pickup/feeding system.
Explains various operating modes like start-up, recovery, standby, and printing.
Step-by-step procedures for replacing components of the fixing system, including rollers and sensors.
Details the power supply, including distribution, switches, rated outputs, protection, and energy-saving functions.
Step-by-step procedures for replacing external covers and internal components.
Procedure for installing MEAP applications, including obtaining license files and checking system requirements.
Instructions for backing up, formatting, and restoring MEAP application data using the SST.
Procedure for replacing the hard disk drive, including re-installing applications and license files.
Instructions for starting the device in safe mode to troubleshoot MEAP applications.
Troubleshooting common issues related to communication tests and network settings.
Lists and explains error messages related to communication failures and their remedies.
Lists parts that require periodical replacement based on their life or usage count.
Outlines the basic procedure for scheduled servicing and provides charts for reader and printer unit maintenance.
Lists error codes and their descriptions.
Provides detailed explanations of error codes and their remedies.
Lists error codes related to the SEND function and results of self-diagnosis.
Categorizes jam codes by machine proper, finisher-related, and ADF-related.
Instructions for formatting all partitions or selected partitions of the HDD.
Covers downloading system software, RUI, language, SDICT, MEAPCONT, KEY, TTS, BOOT, DCON, RCON, G3 FAX, and backup data.
To Next Page
General