Need help?Do you have a question about the Canon iR3245 Series and is the answer not in the manual?
General| Print Speed | Up to 45 ppm (A4) |
|---|---|
| Resolution | 1200 x 1200 dpi |
| First Copy Time | 3.9 seconds |
| Maximum Copy Size | A3 |
| Duplex Printing | Automatic |
| Scanning Resolution | 600 x 600 dpi |
| Interface | USB 2.0, Ethernet |
| Power Consumption | 1.5 kW (Max) |
| Functions | Copy, Print, Scan |
| Warm-Up Time | 30 seconds |
| Paper Capacity Standard | 550 sheets |
| Network Connectivity | Ethernet (100Base-TX/10Base-T) |
| Memory | 512 MB (Standard) |
| Hard Disk Drive | Optional 40 GB |
| Operation Panel | 5.7-inch QVGA |
| Paper Sizes | A3, A4, A5, B4, B5 |
| Paper Weights | 64 to 128 gsm |
| PDL | PCL5e, PCL6, UFR II, PS3 |
| Network Protocols | TCP/IP, IPX/SPX |
Covers critical safety precautions for disassembly, laser light, toner handling, and lithium batteries.
Provides step-by-step instructions for unpacking the machine and installing components like filters, toner, and drum units.
Describes how to detect delay jams and stationary jams within the pickup/feeding system.
Describes the machine's protective measures against failures like short circuits and overheating.
Provides instructions for removing and replacing external covers of the machine.
Provides a step-by-step guide for installing MEAP applications, including obtaining license files.
Details the procedure for adding a license file to a MEAP application via SMS.
Explains how to stop or disable a MEAP application's license.
Provides instructions for downloading or deleting an invalidated license file.
Details the procedure for uninstalling MEAP applications from the device.
Describes how to enter MEAP safe mode for system restoration or troubleshooting.
Details the settings required to monitor an iR device with e-Maintenance/imageWARE Remote.
Provides steps to troubleshoot issues when the communication test with UGW results in FAIL.
Lists parts that must be replaced periodically to ensure functional performance.
Identifies parts that may require replacement due to wear or damage during the warranty period.
Outlines the basic procedures for scheduled servicing, including reader and printer units.
Provides instructions for cleaning specific components like the fixing entrance guide and CCD unit mirror.
Covers initial checks for installation, paper, consumables, and periodical service items.
Provides detailed descriptions of error codes for the DC controller, reader, ADF, finisher, and HDD.
Lists error codes related to the SEND function and provides troubleshooting measures.
Lists jam codes for the printer unit, ADF, and finisher, along with sensor information.
Lists alarm codes and their corresponding descriptions and recommended remedies.
Outlines the necessary preparations for upgrading the system software, including SST installation and PC connection.
Details the procedure for formatting selected partitions on the HDD, including safe mode operations.
Explains the procedures for downloading system software, including batch and individual downloads.
Describes how to upload and download backup data such as MEAP application and system software.
Provides an overview of menus and functions for USB version upgrades and notes to follow.
To Next Page