Canon iR8500 User Manual

CHAPTER 2 NEW FUNCTIONS
2-13
COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON iR8500/7200 REV.1 AUG. 2001
If the message is indicated, advise the user to clean the copyboard glass where the CCD
stops. A label is attached to indicate the stream reading points for small-size and large-size
at the rear of the copyboard glass.
When a jam occurs, dust detection will not be executed at the end of a job. If the job is
cancelled, dust detection will be executed at the end of the job.
F02-208-02
Any of the following conditions can cause the Clean message to appear in
the absence of dust on the glass:
• The feeding belt of the ADF is excessively solid.
• ‘CCD-ADJ’ or ‘LUT-ADJ’ is not executed properly.
If such is the case, clean the belt (with alcohol) and execute ‘CCD-ADJ’ or
‘LUT-ADJ’ once again.
Point of reference
for small-size
Cleaning points
Point of reference
for large-size
Label
185mm
385mm

Canon iR8500 Specifications

General

Print Resolution	1200 x 1200 dpi
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Grayscale Halftones	256 Levels
Duplexing	Yes
Functions	Print, Copy, Scan
Maximum Original Size	11" x 17"
Copy Size	11 x 17 inches
Connectivity	USB, Ethernet
Operating System Compatibility	Windows, Mac
Supported Media Sizes	Letter, Legal