Canon IXUS 80 IS User Manual

Getting Started
Printing
18
Printing
1. Connect the camera to a direct print compatible printer.
• Hook your fingernail or the wrist strap toggle under the bottom
edge of the camera’s terminal cover to open it, then insert the
interface cable all the way into the connector.
• See the printer’s user guide for connection instructions.
• Printing is also possible using a non-Canon-brand printer
provided the printer is PictBridge compliant. Refer to the Direct
Print User Guide for details.
2. Turn on the printer.
3. Set the camera’s mode switch to (Playback) and
turn on the power.
• The button will light blue.
4. Use the or button to select an image to print and
press the button.
• The button will blink blue and printing will start.
• After you finish printing, turn off the camera and the printer and
disconnect the interface cable.
Button
Power Button
Mode Switch
/ Buttons
Interface Cable
DIGITAL Terminal

Canon IXUS 80 IS Specifications

General

Model	Canon IXUS 80 IS
Sensor	1/2.5-inch CCD
Resolution	8.0 megapixels
Optical Zoom	3x
Digital Zoom	4x
Shutter Speed	15 - 1/1500 sec
White Balance	Auto, Daylight, Cloudy, Tungsten, Fluorescent, Fluorescent H, Custom
Dimensions	86.8 x 54.8 x 22.0 mm
LCD Screen	2.5 inch
ISO Sensitivity	Auto, ISO 80/100/200/400/800/1600
Exposure Compensation	+/- 2 EV in 1/3 stop increments
Video Recording	640 x 480 (30 fps)
Storage Type	SD/SDHC/MMC
Battery	NB-4L Lithium-Ion
Weight	125 g (including battery and memory card)
Image Stabilization	Optical Image Stabilizer
Continuous Shooting	Approx. 1.3 fps