Canon IXUS 80 IS User Manual

70
The Image Stabilizer function allows you to minimize the camera shake
effect (blurred images) when you shoot distant subjects that have been
magnified or when you shoot in dark conditions without a flash.
Setting the Image Stabilizer Function
Available Shooting Modes p. 220
Off –
Continuous
You can check the effect of the IS mode on image blur
on the LCD monitor since the IS mode runs continually.
This makes it easier to compose images and focus on
subjects.
Shoot Only
IS mode is only activated when the shutter button is
pressed, so subjects will be captured with reduced blur
even if their movements on the LCD monitor are not
smooth.
Panning
This option only stabilizes the effect of up and down
camera motions on the image. This option is
recommended for shooting objects moving horizontally.
1
Select [IS Mode].
1. Press the button.
2. In the menu, use the or
button to select [IS Mode].
2
Accept the setting.
1. Use the or button to select an
image stabilizer option.
2. Press the button.

Canon IXUS 80 IS Specifications

General

Model	Canon IXUS 80 IS
Sensor	1/2.5-inch CCD
Resolution	8.0 megapixels
Optical Zoom	3x
Digital Zoom	4x
Shutter Speed	15 - 1/1500 sec
White Balance	Auto, Daylight, Cloudy, Tungsten, Fluorescent, Fluorescent H, Custom
Dimensions	86.8 x 54.8 x 22.0 mm
LCD Screen	2.5 inch
ISO Sensitivity	Auto, ISO 80/100/200/400/800/1600
Exposure Compensation	+/- 2 EV in 1/3 stop increments
Video Recording	640 x 480 (30 fps)
Storage Type	SD/SDHC/MMC
Battery	NB-4L Lithium-Ion
Weight	125 g (including battery and memory card)
Image Stabilization	Optical Image Stabilizer
Continuous Shooting	Approx. 1.3 fps