Canon L2000 - Coded Speed Dial

6
B. CODED SPEED DIAL (*000 TO *127 )
1. Open all three panel covers
2. Press Data Registration
3. Press ▼ until display shows “4. ADD. REGISTRATION”
4. Press OK
5. Press ▼ to display “2. CODED SPD DIAL”
6. Press OK
7. Press ▼
(if necessary) until an empty space appears
8. Press OK twice
9. Enter fax number
10. Press OK twice
11. Enter name (refer to A.9. on III : TO STORE FAX NUMBERS)
12. Press OK
13. To continue, press Data Registration
14. Repeat steps No. 7 to No. 12
15. To end, press Stop


